Kayfun the series. Anything you need to know HERE.

Discussion in 'Tips and Tricks' started by MrMocha, 21 Sep 2014.

  1. MrMocha

    MrMocha New Member

    Messages:
    17
    Likes Received:
    8
    KAYFUN LITE BYCLOPE 3.PNG
    Your Kayfun is NOT a rocket science.
    It is simple and easy to maintain.

    - You need to rebuild the coil?
    - You need to rewick?
    - You need to replace the insulators?

    Watch this and be an instant kayfun expert. (Applicable to all Kayfun series.)

     
  2. seefutt

    seefutt New Member

    Messages:
    7
    Likes Received:
    5
    Gender:
    Male
    To improve airflow on KFL+,
    1.Remove airflow adjustment screw,
    2.Enlarge air intake hole at base (I maxed out at 2.34mm(3/32),ori is 1.6mm on mine).Be very careful when drilling as the bit passes the threaded portion where the adjustment screw is, as the bit has a tendency to grab and potentially break.
    3.Enlarge the center post hole. The walls around the hole are already quite thin.Mine ori is 1.5mm. Most people enlarge it to 2mm and be aware that the center post's integrity will be reduced, meaning it may break if overtightened. I'm willing to never remove the post forever,so I drilled it to 2.2mm.
    Same caution,be very careful as the bit passes the 2 bottom side holes.

    With these mods, you can lung hit the KFL+ :)
     

Share This Page